SPIRAL ROLLING

If you are seeking a fabricator for forming and bending of stainless steel, aluminum, or carbon steel to make Pipe Supports, Pipe Saddles, Pipe Clamps, Pipe Mounting Brackets, Pipe Shields, or Pipe Flanges please contact us for more information about how we can help.

With years of experience in rolling and forming structural shapes, as well as other types of metal, we can provide the knowledge and insight necessary to produce a quality product that will compliment any project.

Rolling material such as flat bars, plate, sheet metal, and other structural shapes to make pipe supports, pipe clamps, pipe saddles, brackets, pipe shields, and flanges requires particularly special care in handling the material in order to provide parts that meet customer expectations, and ensure satisfaction. Here at Jorgenson Metal Rolling & Forming we take great pride in the service that we provide and always take the necessary measures to maintain our quality. 

This is a custom designed spiral stair installed in the home of one of our customers. All of the curved parts were rolled by Jorgenson Metal Rolling & Forming and prepped for installation by the customer.

Spiral rolling is the art of taking a straight structural shape such as a tube, pipe or channel and rolling it to an arc that can be used as a handrail, stringer, or decorative element of a spiral staircase.

Rolling a part for a spiral staircase creates an arc that can be positioned to connect a bottom mounting point to the upper mounting point of the spiral stair or curved staircase, whether that is the second floor of a building, or a landing. Structural shapes can be rolled to connect points that are at different elevations, or points that are on the same plane.

  •  

    Here at Jorgenson Metal Rolling and Forming we are always upgrading and increasing our capacities and capabilities. If you do not see the capacity you need met listed on our site, please do not hesitate to call us.

    12” Structural Channel Rolled to 25 foot radius

    This is 12” channel rolled the easy way leg out to a 25 foot radius. We specialize in structural shape rolling to spirals. We do spiral channel rolling, spiral beam rolling, spiral pipe rolling as well as spiral square and rectangular tube rolling. Channel Rolling and Beam rolling on edge the hard way is also done at our facility. Channel like this can be used for a single or multiple steel or metal stringer in a curved staircase.

    2” sch40 Steel Pipe rolled to 22 foot radius

 

Custom Rolling and Bending. We Bend Stainless Steel, Carbon Steel, Aluminum, Brass, Copper, Nickel Alloys, Galvanized Steel and Other Metal.

1.5” Aluminum Round Tube Rolling

This is 1.5” Aluminum round tube rolled to a 136” radius. At Jorgenson Metal Rolling & Forming we specialize in rolling aluminum in all shapes, including spiral square and rectangular tube rolling, spiral pipe rolling, spiral channel rolling and spiral round tube rolling for curved stair, spiral staircase, spiral stringer, or other decorative elements of a spiral stair. We take extra care in handling materials like aluminum for projects where the material will be exposed.

8” x 4” Steel Rectangular Tube Rolled

This is 8” x 4” rectangular tube rolled to an inside radius of 139 inches. We specialize in structural shape rolling for spiral stringers, spiral staircases and curved staircases, including spiral channel rolling and spiral beam rolling, as well as, spiral tube rolling and spiral pipe rolling. Stringers are supportive elements of a spiral staircase that are sometimes exposed and other times covered in construction.

6” x 2” Steel Tube Rolled to a 25 foot radius

Since 1984, Jorgenson Metal Rolling and Forming has been in the business of bending steel and other metal. We provide in-house spiral square and rectangular tube rolling, spiral pipe rolling, spiral beam rolling, spiral channel rolling, and spiral plate & flat bar rolling. We also bend tubes and pipes, channels and beams, tracks and railings. If it's steel or any other metal, we can bend it for your spiral stair or curved staircase.


The structural steel rolling and
forming services that we provide include:


  • + Tube Rolling - up to 6" x 6” square  tube & larger in rectangular tube
    + Beam Rolling - up to 15" beam
  • + Channel Rolling - up to 15"
  • + Pipe Rolling - up to 8" SCH 40
  • + Angle Rolling - up to 6" x 6" x 1"
  • + Plate Rolling - up to 1" thick x 10ft. wide

 

In additional to structural steel rolling &
forming, we provide other metal bending services:

  •  

    + Square and Rectangular Tube Bending
  • + Metal Pipe Bending
  • + Press-brake Plate Bending

Contact Us for a Free Quote

Jorgenson Metal Rolling and Forming is here to provide all of your structural steel rolling, forming and bending needs. Contact us toll free, or fax your information and one of our estimators will get back to you.


Toll Free:  (877)  754 – 0900

(714) 754 – 0900  phone
(714) 754 – 0905  fax 

 

Rings and Flanges

Custom Rolling and Bending. We Bend Stainless Steel, Carbon Steel, Aluminum, Brass, Copper, Nickel Alloys, Galvanized Steel and Other Metal.

Pipe Clamps, Straps, Saddles, Supports

Custom Rolling and Bending. We Bend Stainless Steel, Carbon Steel, Aluminum, Brass, Copper, Nickel Alloys, Galvanized Steel and Other Metal.

Spiral Rolling

Custom Rolling and Bending. We Bend Stainless Steel, Carbon Steel, Aluminum, Brass, Copper, Nickel Alloys, Galvanized Steel and Other Metal.

Pipe Bending, Square Tube Bending, Rectangular Tube Bending

Custom Rolling and Bending. We Bend Stainless Steel, Carbon Steel, Aluminum, Brass, Copper, Nickel Alloys, Galvanized Steel and Other Metal.

Metal Bending and Metal Forming

Custom Rolling and Bending. We Bend Stainless Steel, Carbon Steel, Aluminum, Brass, Copper, Nickel Alloys, Galvanized Steel and Other Metal.

Custom Metal Fabrication

Custom Rolling and Bending. We Bend Stainless Steel, Carbon Steel, Aluminum, Brass, Copper, Nickel Alloys, Galvanized Steel and Other Metal.

Custom Metal Fabrication
Press Brake Bending - Shearing - Punching - Welding

Bending and Welding

Here at Jorgenson Metal Rolling and Forming we are always upgrading and increasing our capacities and capabilities. If you do not see the capacity you need, please do not hesitate to call us.

Read more

Plate Bending, Welding and Punching

Here at Jorgenson Metal Rolling and Forming we are always upgrading and increasing our capacities and capabilities. If you do not see the capacity you need, please do not hesitate to call us.

Read more

Pipe Bending and Welding

Here at Jorgenson Metal Rolling and Forming we are always upgrading and increasing our capacities and capabilities. If you do not see the capacity you need, please do not hesitate to call us.

Read more

Plate Rolling and Welding

Here at Jorgenson Metal Rolling and Forming we are always upgrading and increasing our capacities and capabilities. If you do not see the capacity you need, please do not hesitate to call us.

Read more

FAST AND FRIENDLY SERVICE

Here at Jorgenson Metal Rolling and Forming we are always upgrading and increasing our capacities and capabilities. If you do not see the capacity you need, please do not hesitate to call us.

Call (877) 754-0900

What we do at Jorgenson Metal Rolling and Forming

Plate Rolling, Sheet Metal Rolling

Heavy-Duty Plate Rolling - Flat Bar Rolling Sheet Metal Forming

Read more

Structural Shape Rolling

Angle Rolling - Beam Rolling - Square & Rectangular Tube Rolling - Channel Rolling - Heavy Bar Rolling

Read more

Pipe and Tube Rolling & Bending

Pipe Rolling & Bending - Square and Rectangular Tube Rolling & Bending

Read more

Plate Bending, Sheet Metal Bending

Read more