Custom Rolling, Bending, Forming Steel - Since 1984

   
 


Pipe and Tube Rolling & Bending

Pipe Rolling & Bending - Square and Rectangular
Tube Rolling & Bending

 
1.5 inch Aluminum round tube rolling to arcs
 
4 x 2 inch Aluminum rectangular tubes rolled to arc

Pipe and Tube Rolling

 

Pipe and Tube Rolling

These are some 1 1/2" Diameter aluminum round tubes that have been rolled to a nice curve. At Jorgenson Metal Rolling & Forming we specialize in rolling round tube and pipe in many different material types, such as aluminum tube rolling, stainless steel tube rolling, brass tube rolling, copper tube rolling, and plain steel tube rolling and bending. Don’t hesitate to email or call us for more information about our tube and pipe rolling capabilities.

 

Above are 2 pcs of 4” x 2” x 1/4" aluminum rectangular tubes that have been rolled the easy-way to a very gradual and consistent curve. At Jorgenson Metal Rolling & Forming we specialize in rolling rectangular tube the easy-way, as well as the hard-way or on-edge. Rolling rectangular tube is just one of our structural shape rolling capabilities, we also do square tube rolling, pipe rolling and round tube rolling. Rectangular tube, square tube and round tube can be rolled to be used as a curved stair stringer, spiral stair stringer, spiral handrail, curved guard rail, or decorative feature to a curved stair.

 

Big bent plates on palette
 
Rolled Pipe U Bend
Large Rolled Rectangular Tube
 
Rolled Pipe U Bend

Large Tube Rolling

 

Pipe Rolling

This is a 12” x 4” steel rectangular tube that is rolled the easy-way to a consistent curve. Here at Jorgenson Metal Rolling & Forming we specialize in rolling large rectangular steel tubing like this for many different purposes, such as spiral stringer rolling, curved stair stringer rolling, gate top rolling, canopy beam rolling, guard rail rolling, and many other purposes. Don’t hesitate to email or call us for more information about our tube rolling capabilities.

 
This is 3” sch. 40 stainless steel pipe rolled to 180 degrees. Rolling and bending pipe is one of our specialties at Jorgenson Metal Rolling & Forming. We make custom U – bends, J – bends, curved bollards, curved guard rails and other similar products using tube and pipe bending. Please call or email us for more information on how we can help with your custom metal fabrication needs.
 

pipe rolling, pipe rolled up to 6 inch
 
tube rolling, rectangular tube rolled hardway
Pipe Rolled Up to 6 inch
 
Rectangular Tube Rolled Hardway 5 x 2

Pipe Rolling

This 2.0" sch 40 pipe is rolled to a 22 foot radius. We do pipe bending and also pipe rolling in Steel, Aluminum and Stainless Steel. At Jorgenson Metal Rolling and Forming we specialize in rolling pipe and round tube for many different purposes, including making complete tube rings, metal hoops and circles, as well as rolling pipe and tube to be used as a curved stair stringer, spiral stair stringer, curved handrail or decorative feature in a curved stair. Contact us for more information about how we can help you’re your pipe and tube rolling needs.

 

Tube Rolling

This is 5” x 2” rectangular tube rolled the hard way to an inside radius of 10 feet. Rectangular tube is just one of the many shapes that Jorgenson Metal Rolling and Forming specializes in rolling. We also do large square tube rolling, round tube rolling and pipe rolling, as well as pipe bending and tube bending. For more information about how we can help with your rolling needs please call us or email us through our Contact Us page.

 

 
square tube rolling
Stainless steel round tube rolling to complete rings
 
Rolled Stainless Steel Tube Rings

Pipe and Tube Rolling

Square Tube Rolling

These are complete stainless steel tube rings that have been rolled to a finished circle using 1 ½” diameter stainless steel round tube. At Jorgenson Metal Rolling & Forming we specialize in making specific shapes such as rolling metal rings, rolling steel hoops, rolling metal flanges, as well as rolling spirals, helixes & tracks using round tube, pipe rolling, or square and rectangular tube rolling. Contact us for more information about how we can help with your tube or pipe rolling needs.

 

This is 2” x 2”, with a .25 wall thickness, stainless square tube rolled into complete metal tube rings with an inside radius of 6 inches. We do tube bending and tube rolling in steel, aluminum and stainless steel. At Jorgenson Metal Rolling & Forming, located in Santa Ana, California,, we specialize in tube rolling and pipe rolling.

 

pipe and tube rolling, square tube rolling
 
3 pcs. Pipe Rolling
 
Round aluminum tube bending to 90 degree

Stainless Steel Pipe Rolling

Pipe and Tube Rolling

These are three pieces of 2 1/2” sch. 40 stainless steel pipe that had been bent to a full 180 with a 6” inside radius at the bend, and each part has two equal length legs that are straight per our customer’s specifications. At Jorgenson Metal Rolling & Forming we specialize in all forms of structural steel rolling & bending which includes pipe and tube rolling, pipe bending & tube bending to make various parts such as U – bends, J – bends, curved bollards, curved guard rails and other similar products.

 

Here we have 4 pcs of 1” diameter aluminum round tube that has been rolled or bent to make a 90 degree angle with straight material on both ends. At Jorgenson Metal Rolling & Forming this kind of precision bending is our specialty. We do round tube bending, pipe bending, and even square and rectangular tube bending using many different types of material, such as, aluminum, copper, bronze, stainless steel and plain steel. Contact us for more information about our tube bending and pipe bending capabilities.

 

Rectangular Tube Rolled Hardway
 
rectangular tube rolling
Rectangular Tube Rolled Hardway
 
Rectangular Tubing Rolled 4 x 8 Heavy Wall

Rectangular Tube Rolling

 

Rectangular Tube Rolling

This is 5” x 3” rectangular tube rolled the hard way to an inside radius of 16 feet. Rectangular tube is just one of the many shapes that Jorgenson Metal Rolling and Forming specializes in rolling. We also have a full service fabrication department located in our facility that can help you with any special needs associated with your rolling jobs. Please contact us for more information on how we can be your one-stop-shop for all of your rolling, bending and fabrication needs.

 

This is 8” x 4” rectangular tube with a heavy wall rolled to an inside radius of 18 feet. At Jorgenson Metal Rolling & Forming, located in Santa Ana, California, we specialize in rolling large rectangular and large square tube like this, as well as large round tube and pipe to be used as architectural features, structural components and for many other purposes.

 

 
2 inch Square tube rolling to S-curve
 
3 x 2 Rectangular tube rolling the hardway on edge

Pipe and Tube Rolling

 

Pipe and Tube Rolling

Above are 3 pcs of 2” square steel tube that have been precision rolled to make an S curve, or S shape in 1-piece with a varying radius or curve. Here at Jorgenson Metal Rolling & Forming we are able to offer special rolling like this to make any feature more unique using our extensive background in tube rolling for unique projects that require great communication and understanding. Don’t hesitate to contact us for more information about how we can help you with your unique project or job.

 

Here are 3 pcs of 3” x 2” rectangular tube that has been rolled the hard-way or on-edge to a specific radius or curve. We at Jorgenson Metal Rolling & Forming specialize in rolling tube of all different sizes both the easy-way, as well as the hard-way. We can offer the insight needed to successfully roll square and rectangular tube the hard-way with fantastic results like you see above. Contact us for more information about how we can help with your tube rolling needs.

 

pipe and tube rolling, square tube rolling
 
pipe and tube rolling, square tube rolling
Pipe Rolling and Tube Rolling Aluminum
square tube rolled
Square Tube Bending

Square Tube Rolling

Tube Bending

This is 3” x 3” with a .25 wall thickness, aluminum square tube rolled with an inside radius of 15 feet. At Jorgenson Metal Rolling & Forming, located in Santa Ana, California, we specialize in rolling square tube in aluminum, stainless steel and many other material types. For more information about our tube rolling and tube bending capabilities, please call or email us and we will be happy to help.

 

These are 2" x 2" square tubes with a 1/4" wall thickness that have been bent. Rather than rolling these to a gradual radius, these tubes have been bent to a specific angle per our customer’s specifications. Tube bending, pipe bending and pipe & tube rolling are often used to describe the same process, but they differ from each other in what the desired outcome is. At Jorgenson Rolling and Forming we specialize in both bending and rolling, and use which ever process is best suited for our customer’s needs.


tube rolling, rolled rectangular tube large radius
 
tube rolling, pipe and tube rolling rectangular
Rolled Rectangular Tube Large Radius
 
Pipe Rolling and Tube Rolling Rectangular
Tube Rolled 3pcs

Tube Rolling

Tube Rolling

This is 3” x 2” rectangular tube rolled the hard way to an inside radius of 8 feet. At Jorgenson Metal Rolling & Forming, located in Santa Ana, California, we specialize in rectangular tube rolling, square tube rolling and round tube rolling, as well as pipe rolling and pipe bending. Tube rolling and pipe rolling can be used to make many different products, for more information about how we can help with your tube rolling and tube bending needs please visit our Contact Us page and send us an email inquiry.

 

This is 6” x 2” steel rectangular tube rolled to an inside radius of 25 feet. Rectangular tube is just one of the many shapes that Jorgenson Metal Rolling and Forming specializes in rolling. Rolled tubes like this can be used as a curved stair stringer, spiral stair stringer, curved stair handrail, or a decorative feature of a curved stair. For more information about our tube rolling capabilities for curved stairs visit our Contact Us page and send us an email inquiry.

 

square tube rolling
   
Rolled Stainless Steel Square Tube Rings
   

Square Tube Rolling

 

 

This is 2” x 2”, with a .25 wall thickness, stainless square tube rolled into complete rings with an inside radius of 6 inches. These rings were also welded in our custom metal fabrication department, which is located in our facility. At Jorgenson Metal Rolling & Forming, located in Santa Ana, California, we specialize in rolling tube steel, and rolling pipe to make complete metal rings, steel hoops, circles and other round products that are similar. Contact us for more information about our tube rolling and tube bending capabilities.

   
   
 
Printable Version